Common problems of network interface equipment configuration parameters

Ethernet configuration software is used to configure the parameters of network interface equipment.

1. Default parameters of network interface equipment:

IP address port number network working mode device address

Static: 192.168.1.232 10000 TCP server 1

2. Hardware connection mode of network interface equipment:

network cable direct connection:

via switch / Router:

3. Preparatory work

? network cable direct connection: change the computer IP to the following:

? when passing through the switch / router, it can be obtained automatically;

? disable all network cards except local connection in the change adapter management in the computer network and sharing center;

①; Open network and Sharing Center

②; Change adapter settings

③ Computer network connection

If there is a virtual network card, Bluetooth, etc., it also needs to be disabled.

4. Software operation instructions

? when setting equipment parameters, you must first select the equipment:

? specific operation

? IP address modification

How to judge whether the IP in the current network is occupied:

? description of network working mode

TCP Server：

Dam device network working mode

TCP Client：

Dam device network working mode

At this time, the following two parameters can be set

Login package: the information sent when the device connects to the server for the first time as a TCP client;

Heartbeat packet: set the information sent to the server at a fixed interval.